Wednesday, December 12, 2012

Leaping Reindeer Christmas Card

I made this Christmas card using a few of Tim's die cuts.
The colors are quite traditional.
I like the BG background paper, and it seems that the golden snowflake add some glam.
Most items were glued 3D for extra dimension.

Merry Christmas!

(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Sunday, November 18, 2012

Michael Strong Pink Challenge - Japanese Kimono Card

Here's a new card I created using vivid, optimistic colors - mainly shades of pink, as required by the October challenge at enjoyMichaelStrongstamps Yahoo Group .
I gave it to a friend as her birthday card. 


Ingredients:
Shocking pink spotted CS for the card's basis
Striped patterned paper
Shocking pink spotted CS
A recycled piece of a cereals package
Martha Stewart Large Punch around the Page - Double Arches set
Michael's Strong's Cloisonné Kimono stamp
Embossing ink
Gold EP
ProMarkers - I used shades of pink
3D foam tape
Clear and pink bling

I layered the patterned paper, and then I used the shocking pink spotted CS,
its corners punched using Martha Stewart Large Punch around the Page - Double Arches set (I used only the corner punch here).
I stamped Michael Strong's Cloisonné Kimono on a piece of cereals package (I say: reuse and recycle whenever possible!)
I heat embossed the stamped image with gold EP.
Then I carefully cut the Kimono using TH scissors. I didn't use Michael Strong's die cutters here because the cereals package was very thick.
I colored the Kimono using ProMarkers and glued it 3D for extra dimension.
I added several clear and pink blings to add some glam.

(You can enlarge each photo by clicking on it) 
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Wednesday, October 31, 2012

Halloween Chaos Tags Swap - Tag #2

This is my 2nd tag, created for the ATT Halloween Chaos Tags Swap (group 5).

It's 1 out of 11 Halloween tags created by different ATTers, all beautiful and very creative.
The tags will decorate a 12X12 black canvas, with magnificent topper and charms, created by Stacy Cook, the swap's hostess.





In this tag you can see many typical Halloween themes: a witch cooking a rats soup and a witch flying over a pumpkin, bats, spiders and their webs, a skull with shiny eyes and a cute ghost.




A lower view shows the 3D elements, for extra dimension.




They seem spooky to me, all matching the Halloween colors.
I wish you all a Happy Halloween!

(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Halloween Chaos Tags Swap - Tag #1

This is my first tag, created for the ATT Halloween Chaos Tags  Swap (group 4).
It's 1 out of 11 Halloween tags created by different ATTers, all beautiful and very creative.
The tags will decorate a 12X12 black canvas, with magnificent topper and charms, created by Stacy Cook, the swap's hostess.







In my tag you can see the main theme of poison, and the poor raven lying on its back after being poisoned by the spider.
The raven has a black X for an eye (well. it's dead...) and the colors were chosen for Halloween, of course.








A side view shows the 3D elements, for extra dimension.
I wish you all a Happy Halloween!












(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Saturday, August 25, 2012

Sunny Day - A View From The Roof





(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Saturday, August 11, 2012

Gold And Glitter Mingle Cards Swap

These are the cards I created for the Michael Strong Gold And Glitter Mingle Cards Swap, which took place at the enjoyMichaelStrongstamps Yahoo Group.

I made 2 very similar cards for 2 group members, one was sent to Australia and the other to the US.

I chose contrasting colors - black and gold, and the Gecko which is a symbol of good luck.


Supplies used:
Cream CS for the card's basis
Textured patterned paper - Making Memories - Metallique Floral Brocade Varn
Black CS
Shiny gold paper
Martha Stewart Deep Edger Punch - Garden Trellis
EK Success Corner Adorner
Michael Strong stamp - Gecko (large)
Embossing ink
Gold EP
Ranger's Stickles - green

Double-sided foam tape

Green envelopes


I chose a matt gold patterned paper which has a lovely texture to it, as if it's been embossed all over.
I punched both the black CS and the shiny gold paper, using Martha Stewart Deep Edger Punch - Garden Trellis.
I rounded the corners of another piece of the shiny gold paper and layered all the papers onto the crad's basis.
Then I stamped Michael Strong's Gecko on black CS, using embossing ink.
I heat embossed it with gold embossing powder and cut it with scissors.
The Gecko was glued 3D for extra dimension.
I decorated a bit here and there with some green stickles for glitter and glam.

(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Tuesday, August 7, 2012

Michael Strong ATC Swap - Soar

This is the ATC I created for the Michael Strong ATC Swap, which took place in May 2012 at the enjoyMichaelStrongstamps Yahoo Group.
I made several ATCs, 6 for the swap and extras for myself and for 2 friends.
Some were decorated with a Hummingbird, some with a Dragonfly.




Supplies used:
Recycled Manila CS, cut to ATC size (2.5 x 3.5 inches)
White CS from a recycled box
Ranger's Distress ink - tattered rose, worn lipstick
Inkessentials Distress ink applicator
Michael Strong stamp - The Lily Set (background panel)
Michael Strong stamp - Hummingbird (small)
Michael Strong stamp - Dragonfly (small)
VersaFine ink - Onyx Black
Embossing ink
Black EP
Cream ric-rac ribbon
Tiny pink bling
Clear bling
Double-sided foam tape




To create the background, I stamped Michael Strong's Lily background panel, using VersaFine ink - Onyx Black.
I randomly applied Ranger's Distress ink - tattered rose and worn lipstick - using the Inkessentials Distress ink applicator.
Then I stamped Michael Strong's Hummingbird and Dragonfly (here you only see the ATC with the Hummingbird) on white CS from a recycled box, using embossing ink.
I heat embossed it with black embossing powder and cut it accurately with scissors.
I distressed the edges of the Soar (computer printed) label using Ranger's Distress ink - worn lipstick.
I used a cream ric-rac ribbon to enhance the bird which seems to be flying over it.
Both the Hummingbird and the Soar label were glued 3D for extra dimension.
Can you see the shade of the flying bird?
And the bird's beak is aiming into the flower center, hoping to find some honeydew… there's nothing but distress ink in there! (lol)

I added a tiny pink bling for the bird's eye, and a clear bling for the label, for extra glam.
(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Friday, August 3, 2012

Black, White and Grey Fish Card

Here's my Black, White and Grey Fish Card, which was my entry to May's challenge of the enjoyMichaelStrongstamps Yahoo Group.
Supplies used:
Black leather textured CS for the card's basis
Dark grey leather textured CS
White CS
Silver CS
Patterned paper - Michael Strong's printed black and white panel
DOUBLE ARCHES Martha Stewart LARGE Punch Around Combo
Michael Strong Cloisonné Fish stamp
Embossing ink
White EP
White half pearls with sticky back


The challenge included using this Grey panel by Michael Strong:




And yes, my card was chosen by Mike as one of the winners, so I got his new Hexagon stamp as a prize. It's beautiful… I can't wait to try it.


(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Thursday, July 26, 2012

Happy Birthday Flower Card

I created this birthday card for a dear friend, in vivid colors with a clean and simple look.


It is also my interpretation of May's sketch (#44) at the enjoyMichaelStrongstamps Yahoo Group


Supplies used:
Cream CS for the card's basis
Basic Grey patterned paper - Boxer
Vintage musical notes sheet
Red leather textured CS for stamping
Michael Strong Cloisonné Flower Stamp (large)
VersaFine ink - Onyx Black
Ranger's Distress Ink - fired brick

Large metal brad with a clear bling

Red blings


I stamped Michael Strong's Cloisonné Flower using VersaFine ink - Onyx Black.
I cut it with scissors and added a huge brad at its center.
I distressed the background patterned paper and the vintage musical notes sheet using Ranger's Distress Ink - fired brick.
Then I layered the papers according to the sketch and added red blings for extra glam.



(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Havea creative day! Dorly

Tuesday, July 24, 2012

Wonderful Heart Gift Box

I made this gift box for a special, wonderful woman with a very kind heart.
I think the design says it all.
I gave her this box with a tag and with a turquoise beads bracelet, hand made by me, as a gift to her.




Supplies used for the box:

Cream leather textured CS for the Box

Red leather textured CS

Basic Grey patterned paper - boxer
Ranger's Distress ink - Fired Brick
Wonderful stamp -DoCrafts
VersaFine ink - Onyx Black
Michael Strong's Cloisonné Heart Stamp (large)

Embossing ink

Gold EP

Clear blings

Scor-Pal

1" circle punch

Double sided foam tape


First I created the box out of cream CS, following Michael Strong's tutorial

My addition is a tip for an easy opening of the box.

After scoring and folding the CS, but before cutting and adhering its corners, I used a 1" circle punch to cut a HALF CIRCLE opening at the front side, where the box opens up (I simply inserted the circle punch half way and punched).

It creates a perfect notch to slide your finger in to open the box without wrinkling it.


I distressed the patterned paper using Ranger's Distress ink - fired brick.

I stamped Michael Strong's Cloisonné Heart using Embossing ink.

I heat embossed it using gold EP, and cut it with scissors.

Then I stamped the Wonderful stamp using VersaFine ink - Onyx Black.
I adhered both stamped images using double sided foam tape for extra dimension.
I added clear blings for a glamorous look.


(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Friday, March 23, 2012

Japanese Fan and Sakura Flowers Card

Here is my 5th card for this week as Card Captain of the enjoyMichaelStrongstamps Yahoo Group

I created this card in a color combo which is suitable for a man or for a woman, and fits any occasion.
It has a clean and simple look to it, following the Japanese theme.

Supplies used:
White leather textured CS for the card's basis
White CS leather textured for stamping and punching
Basic Grey patterned paper - Boxer
Michael Strong Cloisonné Silhouette Fans Stamp (large)
Embossing ink
White EP
Distressed Stripes Cuttlebug embossing folder
Sakura Flower punch
Ranger's Distress Ink - faded jeans
Distress Ink applicator
Red blings
Double sided foam tape

I stamped Michael Strong's Cloisonné Silhouette Fan large stamp using Embossing ink and heat embossed it using white EP, then I cut it with scissors.
I embossed a piece of white CS using the Distressed Stripes Cuttlebug embossing folder and colored it with the ink applicator and Ranger's Distress Ink (faded jeans).
I layered it on top of the Basic Grey background paper.
The Silhouette Fan and the punched out Sakura Flowers were glued 3D for extra dimension.
I added red blings for extra glam.




(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Thursday, March 22, 2012

Coffee Lover Gift Box

Here is my 4th creation for this week as Card Captain of the enjoyMichaelStrongstamps Yahoo Group

I'm into boxes this week (you probably noticed that… lol), because they are fun to make and they also seem very practical for little gifts.
I created this box for a lady whose birthday is coming soon.
She loves drinking coffee, therefore I intend to send her this box with several Taster's Choice coffee and ice coffee bars and a little surprise gift in it.
It's Technique Thursday so here's the link to the technique I've used to create the background piece (inspired by Judy, thanks dear!)
It's called Faux Leather with Masking Tape and it's fun - try it!


Supplies used:
Cream leather textured CS for the box
Coffee themed CS (from an advertisement)
Recycled CS
Kraft CS
Scor-Pal
1" circle punch
Michael Strong's Hetty's Coffee Cup Set
Embossing ink
Bronze EP
ProMarker - Azure
Masking tape
Ranger's Distress Ink - faded jeans
Distress Ink applicator
Clear EP
Double sided foam tape


First I created the box out of cream CS, following Michael Strong's tutorial.

My addition is a tip for an easy opening of the box.

After scoring and folding the CS, but before cutting and connecting its corners, I used a 1" circle punch to cut a HALF CIRCLE opening at the front side, where the box opens up (I simply inserted the circle punch half way and punched).

It creates a perfect notch to slide your finger in to open the box without wrinkling it.
I created the background piece according to the tutorial, using recycled CS covered by masking tape pieces, colored by Ranger's Distress Ink (faded jeans) and heat embossed with clear EP.



I stamped Michael Strong's Hetty's Coffee Cup Set Coffee Cup (large) on kraft CS using embossing ink.
I heat embossed it using bronze EP and cut it with nail scissors.
I gave it a touch of color using ProMarker - Azure.
The background piece and the Coffee Cup were glued 3D for extra dimension.
Please note that the music sheet isn't part of the design, I only use it as a background when taking photos.

(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Wednesday, March 21, 2012

Like a Fish in Water Box

Here is my 3rd card for this week as Card Captain of the enjoyMichaelStrongstamps Yahoo Group

I'm into boxes this week, because they are fun to make and they also seem very practical for little gifts.
I created this box for my swimming tutor, a great guy who actually makes me feel like a fish in the water - hence the fish and the waves motifs.
I filled it up with Taster's Choice coffee and ice coffee bars, which fit perfectly into the box.
I'll give it to him with this Beach Party Card and with a bottle of my home-made delicious coffee liquor (the guy just loves coffee!)

Supplies used:
Cream leather textured CS for the box
Basic Grey patterned paper - Archaic
Turquoise CS
Grey leather textured CS
Scor-Pal
1" circle punch
Michael Strong's Hetty's Coffee Cup Set
Michael Strong Cloisonné Fish Stamp
Embossing ink
Silver EP
White EP
Turquoise blingWhite sticky back half pearls
Double sided foam tape


First I created the box out of cream CS, following Michael Strong's tutorial.

My addition is a tip for an easy opening of the box.After scoring and folding the CS, but before cutting and connecting its corners, I used a 1" circle punch to cut a HALF CIRCLE opening at the front side, where the box opens up (I simply inserted the circle punch half way and punched).It creates a perfect notch to slide your finger in to open the box without wrinkling it.


I stamped Michael Strong Cloisonné Fish using Embossing ink.
I heat embossed it using silver EP and cut it with scissors.
I added a turquoise bling to enhance the eye of the fish.
I stamped the turquoise CS with Michael Strong's Hetty's Coffee Cup Set - the steam panel wonderfully resembles waves in the water - and heat embossed it using white EP.
The steam panel and the Fish were glued 3D for extra dimension.
I added the pearls to resemble water bubbles.

(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Tuesday, March 20, 2012

Spring Flowers Tea Box

Here is my 2nd creation for this week as Card Captain of the enjoyMichaelStrongstamps Yahoo Group

I created this tea box for a friend.
We meet often and have tea together, so she was very pleased to receive it, and as I guessed she likes purple!
I chose spring colors as spring is in the air - can you feel it?

First I created the box out of cream CS, following Michael Strong's tutorial.
My addition is a tip for an easy opening of the box.
After scoring and folding the CS, but before cutting and connecting its corners, I used a 1" circle punch to cut a HALF CIRCLE opening at the front side, where the box opens up (I simply inserted the circle punch half way and punched).
It creates a perfect notch to slide your finger in to open the box without wrinkling it.
Try it, it's simple and it works.

Supplies used:
Cream leather textured CS for the Box
Patterned paper by Crafty Individuals - Springtime (Book 3)
Light blue leather textured CS for stamping
Patterned paper for the Rosette (from a friend)
Scor-Pal
1" circle punch
Sizzix Sizzlitz Decorative Strip Die - Paper Rosette by Tim Holtz
Michael Strong Cloisonné Flower Stamp (small)
Embossing ink
Gold EP
Ranger's Distress ink - dusty concord
Large light green bling
Double sided foam tape


I distressed the patterned paper using Ranger's Distress ink - dusty concord.
I stamped Michael Strong's Cloisonné Flower using Embossing ink.
I heat embossed it using gold EP.
Then I cut it and added a large light green bling to enhance the flower's center.
The Rosette and the Flower were glued 3D for extra dimension.



(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Monday, March 19, 2012

Happy Birthday Hummingbird and Rosette Card

Here is my 1st card for this week as Card Captain of the enjoyMichaelStrongstamps Yahoo Group


I created this birthday card in optimistic colors with a romantic chic.

It is also my interpretation of this month's sketch (#43) at the group.

Supplies used:
Cream CS for the card's basis
Papermania patterned paper - Origins (2 pages)
Cream CS for the Ornamental die
Patterned paper for the Rosette (from a friend)
Recycled white CS (from a tea pack) for stamping
Sizzix Movers & Shapers Die - Ornamental by Tim Holtz
Sizzix Sizzlitz Decorative Strip Die - Paper Rosette by Tim Holtz
Michael Strong Cloisonné Hummingbird Stamp (small)
Embossing ink
Michael Strong Midnight Black EP
ProMarkers - Vanilla, Tulip Yellow
Ranger's Distress Ink - fired brick
Black lace
Sentiment - "Happy Birthday" gold rub-on
Tiny clear bling

Black gel pen

Double sided foam tape


I stamped Michael Strong's Cloisonné Hummingbird using Embossing ink.
I heat embossed it using Michael Strong Midnight Black EP.
Then I cut it and colored it using ProMarkers. I added a tiny clear bling for the bird's eye.
I distressed the background patterned paper and the Ornamental die using Ranger's Distress Ink - fired brick.
I used a black gel pen to draw faux stitches around the Ornamental die.
Then I layered the papers according to the sketch and added the black lace.
I added the rub-on sentiment.
The Rosette and the Hummingbird were glued 3D for extra dimension.



(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly